Industrial Ventilators

Use renewable energy to power your Industrial Vent

Description
Specifications
Warranty
Resellers
Downloads

Alsynite One Industrial Turbine Ventilators use renewable wind energy to create a positive flow through the ventilator. Even the slightest wind speeds will cause the head to spin. An area of low pressure is created on the leeward side of the vent and the air drawn out between the vanes on the head of the ventilator feed this low pressure zone.

This process allows for a continuous airflow through the vent. The centripetal forces created by the rotation of the vent will expel the air outwards from the edge of the vanes and this hot and stale air is replaced by cooler and fresh air from outside the building. Thermal currents and temperature differentials will also allow the ventilation process with the vent, even with no wind.

Vent Type	AITV150	AITV300	AITV600	AITV900
Throat Area (m³⁾	0.018	0.071	0.283	0.636
Total Weight (kg)	2.5	5	12	25
Overall Diameter (mm)	332	480	770	1100
Overall Height (mm)	435	480	720	940
Throat Diameter (mm)	150	300	600	900
Flashing Size (mm)	400 x 400	500 x 600	900 x 900	1200 x 1200

Make-up air inlet area should be 3 times that of the exhaust (throat) area.

Alsynite One Industrial Turbine Ventilators offer you:

Vertical vane technology for better performance at all wind speeds.
Up to three times the exhaust capacity than round shaped ventilators.
Lightweight, high strength aluminium construction means no rust.
Performance without electricity.
Year-round ventilation.
High-precision, quality bearings.
Larger exhaust openings for better ventilation results
15 Year Warranty*

Specifications

Part of Vent	Material
Vanes	Aluminium 5005 H34
Plates	Aluminium 5005 H34
Angle Adaptor	Aluminium 5005 H34
Flashing	Aluminium 5005 H34
Dome	Aluminium 1200 H0
Brackets	Aluminium 6060 T591
Tri-brackets	Powder Coated Mild Steel
Shaft	304 Stainless Steel
Upper bearing	Double row ball bearing – BWF30 – 119Z
Lower bearing	Single row ball bearing – SB204-12C
Upper bearing assembly	Glass Reinforced ASA
Upper bearing protector	Aluminium 1200 HO
Lower bearing protector	304 Stainless Steel
Note: Tri-bracket and lower bracket bearing only used on 900mm vent

WARRANTY

ALSYNITE INDUSTRIAL TURBINE VENTILATORS

Alsynite NZ Limited warrants for a period of 15 years from the date of purchase that the Industrial

Turbine Vent will spin when subject to direct wind under normal conditions for domestic or industrial use.

This warranty, where it relates to personal domestic use, is governed by the Consumer Guarantees Act 1993. All other liability, except as implied by law is excluded.

To the extent permitted by law, normal industrial use is governed by the Sale of Goods act 1908. All other liability, except as implied by law, is excluded.

To the extent that Alsynite NZ Limited is required to meet its obligations under this warranty, Alsynite may, at its discretion, replace or repair the item or reimburse the purchase price except where it is required by statute to meet a different obligation.

Except as required by statute, Alsynite NZ Limited will not be responsible for any repairs or replacement, due to damage by storm, faulty installation, freight or handling of the item and mechanical damage howsoever caused.

Except as required by statute, this warranty is limited to the original purchaser of the product.

To the extent permitted by law, all other warranties, express or implied are expressly excluded.